Creator Resins are compatible with most non-Formlabs LCD & DLP 3D printers.

Formlabs also created Validated Settings Profiles for the following printers:

• Anycubic Photon Mono 2
• Anycubic Photon D2
• Elegoo Mars 4
• Elegoo Saturn 3 Ultra
• Creality Halot Mage 8K
• Phrozen Sonic Mini 8K
• Uniformation GK2

Creator Resins are not supported on Formlabs printers.

Creator Super Clear has a Notched Izod Impact Strength of 25 J/m and an Ultimate Tensile Strength of 52 MPa. Printed parts are stiff and strong, and their ability to withstand an impact is largely dependent on the part geometry.

Creator Super Clear produces parts with great clarity right off the printer. To achieve the top clarity, follow these tips:

• Wash parts with clean IPA that has not been used to wash non-clear parts.
• Optional: use a spray clear coat, such as Krylon Crystal Clear Coating Spray
• Optional: use sand paper, a Dremel, or a polishing wheel to buff and polish the parts until glossy.

Creator Super Clear can be dyed both in liquid form and printed form. In liquid form, simply add the desired amount of resin dye to the resin vat. In solid, printed form, submerge the part in a heated bath of dyed water at low temperatures for 10-20 minutes. Wash parts with water after dyeing.