Skip to content

Print Settings

Print settings were developed and validated by Formlabs Materials Scientists. Creator Resin settings were developed for the printers listed below, but are compatible with most non-Formlabs LCD and DLP printers.

Each printer / resin combination has two separate settings options: Reliable and Fast

  • Reliable settings received the most validation and are optimized to produce a successful print across a variety of geometries, but have slower motor moves.
  • Fast settings received less validation and represent the fastest motor moves that can still produce a successful print. Fast settings should be used with discretion, and perform best with smaller, well-supported parts. Fast settings are on average 30% faster in Creator Super Clear Resin, and 50% faster in Creator Tough Resin.

Each setting combination is available with both Chitubox and Lychee slicers below. 

Note: If your specific printer type does not have validated settings, choose the next closest printer according to brand. Please note that because Creator Series Resins do not use highly reactive chemicals such as ACMO, that normal exposure times can be higher. Do not use default settings from other resin manufacturers. 

Click in the box to download the desired setting.

 Creator Tough Settings:

Version 1.0: last updated October 24, 2024

Elegoo Mars 4 9K Chitubox Reliable Chitubox Fast Lychee Reliable Lychee Fast
Anycubic Photon Mono 2 Chitubox Reliable Chitubox Fast Lychee Reliable Lychee Fast
Elegoo Saturn 3 Ultra Chitubox Reliable Chitubox Fast Lychee Reliable Lychee Fast
Anycubic Photon D2 Chitubox Reliable Chitubox Fast Lychee Reliable Lychee Fast
Uniformation GK2 Chitubox Reliable Chitubox Fast Lychee Reliable Lychee Fast
Phrozen Sonic Mini 8K Chitubox Reliable Chitubox Fast Lychee Reliable Lychee Fast
Creality Halot Mage 8K Chitubox Reliable Chitubox Fast Lychee Reliable Lychee Fast

 

Creator Super Clear Settings:

Version 1.0: last updated October 24, 2024

Elegoo Mars 4 9K Chitubox Reliable Chitubox Fast Lychee Reliable Lychee Fast
Anycubic Photon Mono 2 Chitubox Reliable Chitubox Fast Lychee Reliable Lychee Fast
Elegoo Saturn 3 Ultra Chitubox Reliable Chitubox Fast Lychee Reliable Lychee Fast
Anycubic Photon D2 Chitubox Reliable Chitubox Fast Lychee Reliable Lychee Fast
Uniformation GK2 Chitubox Reliable Chitubox Fast Lychee Reliable Lychee Fast
Phrozen Sonic Mini 8K Chitubox Reliable Chitubox Fast Lychee Reliable Lychee Fast
Creality Halot Mage 8K Chitubox Reliable Chitubox Fast Lychee Reliable Lychee Fast

 

Have feedback or requests about the print settings? We'd love to hear from you— fill out this form.

Post Processing Instructions

Creator Tough Resin:

  1. Wash printed parts in IPA or Formlabs Resin Washing Solution for 10 minutes in an Anycubic Wash/Cure Combo, or similar machine. 
  2. Air dry parts for 30-60 minutes, or use compressed air to dry for 30-60 seconds.
  3. Post-cure in Anycubic Wash/Cure Combo, or similar machine, for 10 minutes to achieve a tack-free surface. 

Creator Super Clear Resin:

  1. Wash printed parts in IPA or Formlabs Resin Washing Solution for 10 minutes in an Anycubic Wash/Cure Combo, or similar machine. 
  2. Air dry parts for 30-60 minutes, or use compressed air to dry for 30-60 seconds.
  3. Post-cure in Anycubic Wash/Cure Combo, or similar machine, for 5 minutes to achieve a tack-free surface. 

header.header.header--top-left.header--mobile-left.page-width.header--has-menu { margin-left: 0px; }